bitcoin qt verifying blocks Archives - বেস্টআর্নআইডিয়া.কম

Bitcoin-qt dies with "bus error" in the terminal while verifying block index

It's what the tin says. I try to start up bitcoin-qt and it kills itself. Says "bus error" when run in the terminal. Closest thing I can find online is this: https://bitcointalk.org/index.php?topic=766150.0
EDIT: So I think I fixed it, by disabling all the files in .bitcoin except wallet.dat and /blocks/. The client now has to re-process the blockchain but it´s on the disk still and is returning back to where it was quite quickly.
submitted by sloanonlinux to Bitcoin [link] [comments]

Bitcoin-qt dies with "bus error" in the terminal while verifying block index /r/Bitcoin

Bitcoin-qt dies with submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Is it normal for bitcoin-qt to verify blocks at startup?

This typically takes around 5 minutes on a mechanical drive.
submitted by daf1212 to Bitcoin [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

PSA: Enable Tor as a simple way to make your node reachable.

Become one of the 10% of node operators that receive incoming connections.
Installing bitcoin core is easy, and with pruning it really isn't the space sink it is characterized as. Even a modest computer can complete the initial block download (IBD) and become a full node. But what some users (90%) find a bit more challenging, is how to become a listening node. Listening nodes are an important part of the network, and are simple enough to enable. I can think of 4 ways to do it:
  1. Operate on an OS and Network that support uPnP, allowing bitcoin to open the ports for you.
  2. Subscribe to a VPN that allows you to open ports through their service.
  3. Manually configure your OS and network to forward port 8333 and 18333.
  4. Run Tor and direct bitcoin to listen through it.
I'll discuss #4. Obviously #1 or #2 are easier, but require a VPN subscription or uPnP enabled HW. And if you live in a dorm or don't control the network, Tor may be the only free option available.
As a bit of background, bitcoin supports three networks that your node can listen on:
Obviously, the more you enable, the better, but here are the basic steps for Tor in broad strokes. If you have any questions post them here and I'll see if we can't help you out:
  1. Download, verify1 and install Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch and Admin command console in the directory containing tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor.exe --service stop && tor.exe --service start
  9. Record the hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. (Optional) Activate the bitnodes crawler at https://bitnodes.io/nodes/-8333/
It may take a while for your node to show up on bitnodes. I've found the check button sometimes has trouble with onions. Of course you don't need to do it, but it can provide a simple way to check status once your on the list.

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log

Bridges may be needed if the Gov't shuts down Tor exit nodes. Get Bridges by

emailing [email protected] from Gmail (only) and uncomment as follows:

Bridge obfs4 : cert= iat-mode=

HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 Cert: {Subject: Intevation GmbH; SHA1: c13a65963ad53e78694dd223d518007791a05fe4}
  • 2 PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to Bitcoin [link] [comments]

Windows / Linux Guide to using Trezor with Bitcoin Core (HWI)

This is a guide to using your Trezor with Bitcoin Core. It may seem like more trouble than it's worth but many applications use Bitcoin Core as a wallet such as LND, EPS, and JoinMarket. Learning how to integrate your Trezor into a Bitcoin Core install is rather useful in many unexpected ways. I did this all through the QT interfaces, but it's simple to script. There is a much simpler guide available from the HWI github, and the smallest Linux TLDR is here
Unfortunately, I don't have access to a Coldcard or Ledger. I'm not sure how the setpin or -stdinpass parameters are handled on that HW.

( A ) Install TrezorCTL, HWI, and build GUI

You only need to set the wallet up once, but may repeat to upgrade

( A.I ) Download extract and install HWI

  1. Download and isntall Python
  2. Download https://github.com/bitcoin-core/HWI/archive/1.1.2.zip
  3. Extract it to a working folder (assumes C:\User\Reddit\src\HWI)
  4. Change Directory (cd) to working folder cd "C:\User\Reddit\src\HWI"
  5. Setup venv python -m venv .venv
  6. Enter venv .venv\Scripts\activate.bat 1
  7. Install dependencies python -m pip install -U setuptools pip wheel
  8. Install TrezorCTL python -m pip install trezor[hidapi]
  9. Install HWI python -m pip install hwi pyside2
  10. Download github.com/libusb/libusb/releases/download/v1.0.23/libusb-1.0.23.7z
  11. Extract MS64\dll\libusb-1.0.dll from the archive
  12. Copy to pywin copy libusb-1.0.dll .venv\Lib\site-packages\pywin32_system32\

( A.II ) Build the QT UI files

  1. Download and install MSYS2
  2. Launch a mingw64.exe shell
  3. CD to working folder cd "C:\User\Reddit\src\HWI"
  4. Enter venv source .venv/Scripts/activate 1
  5. Run UI build bash contrib/generate-ui.sh

( B ) Create a Trezor wallet in Bitcoin Core (testnet)

You only need to set the wallet up once, no private key data is stored, only xpub data

( B.I ) Retrieve keypool from HWI-QT

  1. Launch hwi-qt.exe --testnet (assuming testnet)
  2. Click Set passphrase (if needed) to cache your passphrase then click Refresh
  3. Select you trezor from the list then click Set Pin (if needed)
  4. Ensure your Trezor in the dropdown has a fingerprint
  5. Select Change keypool options and choose P2WPKH
  6. Copy all the text from the Keypool textbox

( B.II ) Create the wallet in Bitcoin QT

  1. Launch Bitcoin Core (testnet) (non-pruned) 2
  2. Select Console from the Window menu
  3. Create a wallet createwallet "hwi" true
  4. Ensure that hwi is selected in the console wallet dropdown
  5. Verify walletname using the getwalletinfo command
  6. Import keypool importmulti '' (note ' caging)
  7. Rescan if TXNs are missing rescanblockchain 3

( C.I ) Grab Tesnet coins

  1. Select the Receive tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Select Create new receiving address and copy address
  4. Google "bitcoin testnet faucet" and visit a few sites
  5. Answer captcha and input your addressed copied from C.I.3

( D ) Spending funds with HWI

This is how you can spend funds in your Trezor using Bitcoin Core (testnet)

( D.I ) Create an unsigned PSBT

  1. Select the Send tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Verify your balance in Watch-only balance
  4. Rescan if balance is wrong (see B.II.7) 3
  5. Craft your TXN as usual, then click Create Unsigned
  6. Copy the PSBT to your clipboard when prompted

( D.II ) Sign your PSBT

  1. In HWI-QT click Sign PSBT
  2. Paste what you copied in D.I.6 in PSBT to Sign field
  3. Click Sign PSBT
  4. Copy the text for PSBT Result

( D.III ) Broadcast your TXN

  1. Select the Console window in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Finalize PSBT: finalizepsbt
  4. Copy the signed TXN hex from the hex field returned
  5. Broadcast TXN: sendrawtransaction

Final Thoughts

I did this all through the GUI interfaces for the benefit of the Windows users. Windows console is fine, but the quote escaping in windows console is nightmarish. Powershell would be good, but that throws this on a whole another level for most Windows folks.
There is also the need to use HWI-QT due to a bug in blank passphrases on the commandline. You can work around it by toggling passphrase off or on, but again, it's more than I wanted to spell out.
Footnotes:
  • 1. - Later version of python put the activate script under 'bin' instead of 'Script'
  • 2. - You can run pruned, but you need to have a fresh wallet
  • 3. - Rescan is automatic on 'importmulti' but I was pruned so it was wierd
submitted by brianddk to Bitcoin [link] [comments]

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

Syscoin Platform’s Great Reddit Scaling Bake-off Proposal

https://preview.redd.it/rqt2dldyg8e51.jpg?width=1044&format=pjpg&auto=webp&s=777ae9d4fbbb54c3540682b72700fc4ba3de0a44
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.

Solutions

Syscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
  1. Distribution, burns and user-to-user transfers of Reddit Points are entirely carried out on the Syscoin network. This full-on approach to utilizing the Syscoin network provides the most scalability and transaction cost benefits of these scenarios. The tradeoff here is distribution and subscription handling likely migrating away from smart contracts into the application layer.
  2. The Reddit Community Points ecosystem can continue to use existing smart contracts as they are used today on the Ethereum mainchain. Users migrate a portion of their tokens to Syscoin, the scaling network, to gain much lower fees, scalability, and a proven base layer, without sacrificing sovereign ownership. They would use Syscoin for user-to-user transfers. Tips redeemable in ten seconds or less, a high-throughput relay network, and onchain settlement at a block target of 60 seconds.
  3. Integration between Matic Network and Syscoin Platform - similar to Syscoin’s current integration with Ethereum - will provide Reddit Community Points with EVM scalability (including the Memberships ERC777 operator) on the Matic side, and performant simple value transfers, robust decentralized security, and sovereign store-of-value on the Syscoin side. It’s “the best of both worlds”. The trade-off is more complex interoperability.

Syscoin + Matic Integration

Matic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.

Proving Performance & Cost Savings

Our POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
612722: https://sys1.bcfn.ca/block/6d47796d043bb4c508d29123e6ae81b051f5e0aaef849f253c8f3a6942a022ce
612723: https://sys1.bcfn.ca/block/8e2077f743461b90f80b4bef502f564933a8e04de97972901f3d65cfadcf1faf
612724: https://sys1.bcfn.ca/block/205436d25b1b499fce44c29567c5c807beaca915b83cc9f3c35b0d76dbb11f6e
612725: https://sys1.bcfn.ca/block/776d1b1a0f90f655a6bbdf559ff5072459cbdc5682d7615ff4b78c00babdc237
612726: https://sys1.bcfn.ca/block/de4df0994253742a1ac8ac9eec8d2a8c8b0a6d72c53d6f3caa29bb6c171b0a6b
612727: https://sys1.bcfn.ca/block/e5e167c52a9decb313fbaadf49a5e34cb490f8084f642a850385476d4ef10d70
612728: https://sys1.bcfn.ca/block/ab64d989edc71890e7b5b8491c20e9a27520dc45a5f7c776d3dae79057f59fe7
612729: https://sys1.bcfn.ca/block/5e8b7ecd0e36f99d07e4ea6e135fc952bf7ec30164ab6f4d1e98b0f2d405df6d
612730: https://sys1.bcfn.ca/block/d395df3d31dde60bbb0bece6bd5b358297da878f0beb96be389e5f0e043580a3
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.

Cost Savings

Total cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.

Tools, Infrastructure & Documentation

Syscoin Bridge

Mainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
  • Any Standard ERC-20 token to be moved from Ethereum to the Syscoin blockchain as a Syscoin Platform Token (SPT), and back to Ethereum
  • Any SPT to be moved from Syscoin to the Ethereum blockchain as an ERC-20 token, and back to Syscoin

Benefits

  • Permissionless
  • No counterparties involved
  • No trading mechanisms involved
  • No third-party liquidity providers required
  • Cross-chain Fractional Supply - 2-way peg - Token supply maintained globally
  • ERC-20s gain vastly improved transactionality with the Syscoin Token Platform, along with the security of bitcoin-core-compliant PoW.
  • SPTs gain access to all the tooling, applications and capabilities of Ethereum for ERC-20, including smart contracts.
https://preview.redd.it/l8t2m8ldh8e51.png?width=1180&format=png&auto=webp&s=b0a955a0181746dc79aff718bd0bf607d3c3aa23
https://preview.redd.it/26htnxzfh8e51.png?width=1180&format=png&auto=webp&s=d0383d3c2ee836c9f60b57eca35542e9545f741d

Source code

https://github.com/syscoin/?q=sysethereum
Main Subprojects

API

Tools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.

Documentation

Syscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence

Trade-off

The Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.

Cost

Ethereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.

Z-DAG

Zero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).

Benefits

  • Unique fee-market that is more efficient for microtransaction redemption and settlement
  • Uses decentralized means to enable tokens with value transfer scalability that is comparable or exceeds that of credit card networks
  • Provides high throughput and secure fulfillment even if blocks are full
  • Probabilistic and interactive
  • 99.9999% security assurance within 10 seconds
  • Can serve payment channels as a resilience fallback that is faster and lower-cost than falling-back directly to a blockchain
  • Each Z-DAG transaction also settles onchain through Syscoin Core at 60-second block target using SHA-256 Proof of Work consensus
https://preview.redd.it/pgbx84jih8e51.png?width=1614&format=png&auto=webp&s=5f631d42a33dc698365eb8dd184b6d442def6640

Source code

https://github.com/syscoin/syscoin

API

Syscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.

Documentation

Z-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana

Trade-off

Z-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.

Syscoin Specs

Syscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
  • 16MB block bandwidth per minute assuming segwit witness carrying transactions, and transactions ~200 bytes on average
  • SHA256 merge mined with Bitcoin
  • UTXO asset layer, with base Syscoin layer sharing identical security policies as Bitcoin Core
  • Z-DAG on asset layer, bridge to Ethereum on asset layer
  • On-chain scaling with prospect of enabling enterprise grade reliable trustless payment processing with on/offchain hybrid solution
  • Focus only on Simple Value Transfers. MVP of blockchain consensus footprint is balances and ownership of them. Everything else can reduce data availability in exchange for scale (Ethereum 2.0 model). We leave that to other designs, we focus on transfers.
  • Future integrations of MAST/Taproot to get more complex value transfers without trading off trustlessness or decentralization.
  • Zero-knowledge Proofs are a cryptographic new frontier. We are dabbling here to generalize the concept of bridging and also verify the state of a chain efficiently. We also apply it in our Digital Identity projects at Blockchain Foundry (a publicly traded company which develops Syscoin softwares for clients). We are also looking to integrate privacy preserving payment channels for off-chain payments through zkSNARK hub & spoke design which does not suffer from the HTLC attack vectors evident on LN. Much of the issues plaguing Lightning Network can be resolved using a zkSNARK design whilst also providing the ability to do a multi-asset payment channel system. Currently we found a showstopper attack (American Call Option) on LN if we were to use multiple-assets. This would not exist in a system such as this.

Wallets

Web3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
Syscoin-Qt

Explorers

Mainnet: https://sys1.bcfn.ca (Blockbook)
Testnet: https://explorer-testnet.blockchainfoundry.co

Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!

submitted by sidhujag to ethereum [link] [comments]

Windows Guide to using Trezor with Bitcoin Core (HWI)

This is a guide to using your Trezor with Bitcoin Core. It may seem like more trouble than it's worth but many applications use Bitcoin Core as a wallet such as LND, EPS, and JoinMarket. Learning how to integrate your Trezor into a Bitcoin Core install is rather useful in many unexpected ways. I did this all through the QT interfaces, but it's simple to script. There is a much simpler guide available from the HWI github, and the smallest TLDR is here

( A ) Install TrezorCTL, HWI, and build GUI

You only need to set the wallet up once, but may repeat to upgrade

( A.I ) Download extract and install HWI

  1. Download and isntall Python
  2. Download https://github.com/bitcoin-core/HWI/archive/1.1.2.zip
  3. Extract it to a working folder (assumes C:\User\Reddit\src\HWI)
  4. Change Directory (cd) to working folder cd "C:\User\Reddit\src\HWI"
  5. Setup venv python -m venv .venv
  6. Enter venv .venv\Scripts\activate.bat 1
  7. Install dependencies python -m pip install -U setuptools pip wheel
  8. Install TrezorCTL python -m pip install trezor[hidapi]
  9. Install HWI python -m pip install hwi pyside2
  10. Download github.com/libusb/libusb/releases/download/v1.0.23/libusb-1.0.23.7z
  11. Extract MS64\dll\libusb-1.0.dll from the archive
  12. Copy to pywin copy libusb-1.0.dll .venv\Lib\site-packages\pywin32_system32\

( A.II ) Build the QT UI files

  1. Download and install MSYS2
  2. Launch a mingw64.exe
  3. CD to working folder cd "C:\User\Reddit\src\HWI"
  4. Enter venv source .venv/Scripts/activate 1
  5. Run UI build bash contrib/generate-ui.sh

( B ) Create a Trezor wallet in Bitcoin Core (testnet)

You only need to set the wallet up once, no private key data is stored, only xpub data

( B.I ) Retrieve keypool from HWI-QT

  1. Launch hwi-qt.exe --testnet (assuming testnet)
  2. Click Set passphrase (if needed) to cache your passphrase then click Refresh
  3. Select you trezor from the list then click Set Pin (if needed)
  4. Ensure your Trezor in the dropdown has a fingerprint
  5. Select Change keypool options and choose P2WPKH
  6. Copy all the text from the Keypool textbox

( B.II ) Create the wallet in Bitcoin QT

  1. Launch Bitcoin Core (testnet) (non-pruned) 2
  2. Select Console from the Window menu
  3. Create a wallet createwallet "hwi" true
  4. Ensure that hwi is selected in the console wallet dropdown
  5. Verify walletname using the getwalletinfo command
  6. Import keypool importmulti '' (note ' caging)
  7. Rescan if TXNs are missing rescanblockchain 3

( C.I ) Grab Tesnet coins

  1. Select the Receive tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Select Create new receiving address and copy address
  4. Google "bitcoin testnet faucet" and visit a few sites
  5. Answer captcha and input your addressed copied from C.I.3

( D ) Spending funds with HWI

This is how you can spend funds in your Trezor using Bitcoin Core (testnet)

( D.I ) Create an unsigned PSBT

  1. Select the Send tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Verify your balance in Watch-only balance
  4. Rescan if balance is wrong (see B.II.7) 3
  5. Craft your TXN as usual, then click Create Unsigned
  6. Copy the PSBT to your clipboard when prompted

( D.II ) Sign your PSBT

  1. In HWI-QT click Sign PSBT
  2. Paste what you copied in D.I.6 in PSBT to Sign field
  3. Click Sign PSBT
  4. Copy the text for PSBT Result

( D.III ) Broadcast your TXN

  1. Select the Console window in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Finalize PSBT: finalizepsbt
  4. Copy the signed TXN hex from the hex field returned
  5. Broadcast TXN: sendrawtransaction

Final Thoughts

I did this all through the GUI interfaces for the benefit of the Windows users. Windows console is fine, but the quote escaping in windows console is nightmarish. Powershell would be good, but that throws this on a whole another level for most Windows folks.
There is also the need to use HWI-QT due to a bug in blank passphrases on the commandline. You can work around it by toggling passphrase off or on, but again, it's more than I wanted to spell out.
Footnotes:
  • 1. - Later version of python put the activate script under 'bin' instead of 'Script'
  • 2. - You can run pruned, but you need to have a fresh wallet
  • 3. - Rescan is automatic on 'importmulti' but I was pruned so it was wierd
submitted by brianddk to TREZOR [link] [comments]

Forgot to upgrade your node? Here's how to get back onto the upgraded BCH network:

These instructions are for those who left old versions (0.20.12 or older) of Bitcoin ABC running through the May 15th, 2020 upgrade. Follow these instructions to get back on the main network.
If you are using bitcoin-qt, follow these steps:
  1. Stop your running node
  2. Delete the list of nodes you have banned: rm ~/.bitcoin/banlist.dat
  3. Download version 0.21.x from https://download.bitcoinabc.org/latest/
  4. Start up the new version (./bin/bitcoin-qt)
  5. Open Help -> Debug window
  6. In the console type reconsiderblock 00000000000000000033dfef1fc2d6a5d5520b078c55193a9bf498c5b27530f7
  7. Wait until your node is on the correct chain. This could take some time if your old node was running for a while, and other nodes banned you on the network. You can check that you are on the correct chain by typing getblockchaininfo and verifying the information with a public block explorer such as https://explorer.bitcoin.com/bch, https://blockchair.com/bitcoin-cash, or https://cash.coin.dance/.
If you are running bitcoind, follow these steps:
  1. Stop your running node
  2. Delete the list of nodes you have banned: rm ~/.bitcoin/banlist.dat
  3. Download version 0.21.x from https://download.bitcoinabc.org/latest/
  4. Start up the new version (./bin/bitcoind)
  5. Use bitcoin-cli to type: ./bin/bitcoin-cli reconsiderblock 00000000000000000033dfef1fc2d6a5d5520b078c55193a9bf498c5b27530f7
  6. Wait until your node is on the correct chain. This could take some time if your old node was running for a while, and other nodes banned you on the network. You can check that you are on the correct chain by typing ./bin/bitcoin-cli getblockchaininfo and verifying the information with a public block explorer such as https://explorer.bitcoin.com/bch, https://blockchair.com/bitcoin-cash, or https://cash.coin.dance/.
submitted by Mengerian to btc [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

How I synced on a 2013 ultrabook in a few days

Note: I don't know exactly how long it took because I didn't do it in one go. I guess it was like 4,5 days doing it only at night. At some points(2015Q3, 2018Q2) it slows down and ETA goes up to 16 weeks or something.
The main bottleneck is IO. My 2013 mobile i3 has enough processing power to sync, I only used 3 threads and most of the time only one was close to 100%. The two directories that need to be written and read from intensively are chainstate and blocks/index. I pruned to 2GB and chainstate didn't go much over 3GB during the entire process. blocks/index is like 100MB.
The best solution is to move chainstate and blocks/index to a ramdisk. If you don't have enough ram the linux kernel has a thing called zram. Zram creates a compressed swap(cache) file in ram, this effectively increases your ram size at the cost of a bit of processing power and access speed(of the compressed part). On my machine I can net a bit more than 1GB of extra ram. That's right, with linux you can download more ram! The second best solution is to leave chainstate and block/index on a sdd. From what I've tested it should take up between 5 whole days and 2 weeks.
With regards to config, I didn't see much benefit in increasing the db cache over the default 450MB in bitcoin-qt. If I recall correctly, smaller prune sizes make chainstate larger.
After the initial sync keeping up to date is very easy on resources. You can catch up a week in a few minutes. At the moment bitcoind is using 400MB but I'm still working on bringing that number down.
Remember: If you want safety or if you want to help the network you need o run a full node. A full node is a node that verifies all transactions. A pruned node is a full node.
Edit: bitocoind really likes to hover around 400MB, sometimes it gets higher than that, some times it get's lower. A lot of that is data, not code, so if you start running out of ram your OS should drop those pages and get down to 250~300MiB. If you really want the memory to be this low all the time, on linux, you can either: Use cgroups to set the swappiness of the process to 99 so all data gets swapped but not code does; Use systemd and set MemoryLimit=300MiB(for example) so almost all data gets swapped but no code. I don't think any of those options are worth the small setup hassle.
submitted by nothing_works4me to Bitcoin [link] [comments]

#Reddcoin ($RDD) Core Wallet Release 3.0.1 - PosV v2 SuperMajority Consensus Upgrade at 45.6% - Required Upgrade

Reddcoin (RDD) Core Wallet v3.0.1 - January 09, 2020
Version 3.0.1 is the official release version of Reddcoin Core. It is available for download at Reddcoin Core's Github repository here: https://github.com/reddcoin-project/reddcoin/releases/tag/v3.0.1
This release features PoSV v2.supermajority activation and new staking ruleset (and minor misc fixes). v3.0.1 is still not yet MacOS Catalina compatible. We are still working and should have that fix issued very soon. Sincere apologies to our Mac-using ReddHeads.
It is particularly important that all users upgrade, as once PoSV v2 is enforced, version 4 blocks will be rejected from the network entirely.
Therefore v3.0.1 is a "strongly recommended" update for all users. Note: If you have already installed v3.0.0, this upgrade is not required. If you have not yet upgraded from v2.0.x or earlier, this is a REQUIRED upgrade. Please install the newest version v3.0.1 to avoid losing functionality during supermajority activation of PoSV v2.
Reddcoin Core version 3.0.1 is now available from: https://github.com/reddcoin-project/reddcoin/releases Release Notes are available here and replicated below in this announcement: https://github.com/reddcoin-project/reddcoin/blob/mastedoc/release-notes.md
This is a new major version release of Reddcoin.
Previously, the original and subsequent versions of Reddcoin were taken from a fork of the Litecoin code base.
With the release of Reddcoin V2.0.0, the code was based directly from a fork of Bitcoin. This allows for better source control and feature implementation from upstream changes into the future
With the release of Reddcoin V3.0.0, the PoSV stake reward has been improved to allow for a target 5% network growth, in process re-incentivizing individual network stakers and providing for integrated dev support.
Upgrading to this release is strongly recommended and required for continued operation. Once a supermajority of 90% is reached, old wallets will no longer accept the new v5 blocks.
Please report bugs using the issue tracker at github:
https://github.com/reddcoin-project/reddcoin/issues
How to Upgrade
If you are running an older version of Reddcoin, shut it down. Wait until it has completely shut down (which may take a few minutes for older versions). Run the installer (on Windows) or just copy over /Applications/Reddcoin-Qt (on Mac) or reddcoind/reddcoin-qt (on Linux).
Start wallet. All done!
Reddcoin v3.0.0 introduced an updated PoSV method to better distribute staking rewards and target a overall 5% network growth. Staking and relay policy enhancements 
To implement PoSV v2, Reddcoin Core's block templates are now for version 5 blocks only. When PoSV v2 consensus (Supermajority 9000/10000) is reached, only v5 blocks will be accepted by the network.This equates to approximately 90% of blocks being generated over 1 week period. Status at any time may be viewed in node debug.log
Blockchain Download:
Blockchain data for both testnet and mainnet along with instructions can be downloaded from github. https://github.com/reddcoin-project/bootstrap_files
3.0.1 changelog
*83e212838 - John Nash, 2020-01-09 : really delete these files *3a1458ecd - Oliver Webb, 2020-01-08 : Added missing dependency libminiupnpc-dev for Jessie *d21915431 - Tiago Peralta, 2019-06-21 : Add vout to listtransactions/gettransaction *8d58ea7cf - Oliver Webb, 2020-01-08 : Script for downloading pre compiled binaries for Raspbian Jessie, Stretch or Buster *d4eced1bc - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_stretch.sh *c5e9f91cf - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_jessie.sh *5d5771b00 - Oliver Webb, 2020-01-08 : Delete reddcoin_core_download_raspbian_buster.sh *75c6ae91b - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *54c501787 - Oliver Webb, 2020-01-05 : add reddcoin-qt and remove starting daemon process *acb30a2b6 - Oliver Webb, 2020-01-05 : script files for Raspbian Jessie (also Stakebox) *cfddbe594 - John Nash, 2020-01-05 : Update copyright year and version *e46e5e7de - John Nash, 2020-01-05 : download script for pre compiled wallet *37386790a - John Nash, 2020-01-05 : change libssl deb packages links to github *9dbc772e6 - Oliver Webb, 2020-01-03 : download script for pre compiled wallet *857d697fd - Oliver Webb, 2020-01-03 : change libssl deb packages links to github *2cb74b9a8 - John Nash, 2019-12-31 : update copyright year *c641a1ab3 - Oliver Webb, 2019-12-30 : Raspberry Pi build script files for v3 wallet *a3f21a4a4 - John Nash, 2019-12-30 : add install script for building db4 update instructions for unix, osx, arm building using the db4 install script *5f6299b2a - John Nash, 2019-12-28 : docs: Update build notes for arm processors *465716c01 - John Nash, 2019-12-28 : test for arm devices *3fec3a535 - John Nash, 2018-02-02 : build: update source paths *5f6031ab4 - John Nash, 2019-12-28 : Scrypt n=1024 Pow hash based upon Colin Percival's Tarnsnap (2009) Modified by Artforz, coblee, pooler, wtogami, Nikolay Belikov, reddink *2fd4d91a0 - John Nash, 2019-12-24 : update copyright year *326828b36 - John Nash, 2019-12-24 : set release state true *8ebede0a6 - John Nash, 2019-12-24 : release notes *36df6fdfb - John Nash, 2019-12-23 : add check explictly for v5 blocks or greater *874dc1f0c - John Nash, 2019-12-17 : remove hardcoded global variable rearrange debug log output *763b25db8 - John Nash, 2019-12-17 : move copyright to new line *536baf635 - John Nash, 2019-12-17 : update version and set release state to false *cde9009f3 - John Nash, 2019-12-17 : update copyright year *ae41b7ed3 - John Nash, 2019-12-17 : set isSuperMajority to 90% for mainnet *e43e1c8ed - John Nash, 2019-12-10 : additional logging to verify isSuperMajority in the debug.log output *e31783cac - John Nash, 2019-12-05 : add/update public key for mainnet *405c6f002 - John Nash, 2019-12-05 : add log output for current inflation rate *9cc43c3f7 - John Nash, 2019-12-02 : determine calculated stake based on posv version *7baa3bf75 - John Nash, 2019-11-25 : check the posv transaction for correct pubkey *9ffa7ca38 - John Nash, 2019-11-21 : check for posv v1 or posv v2 blocks when calculating stake reward *39f7aad68 - John Nash, 2019-11-14 : add logging *0e283e6c3 - John Nash, 2019-11-13 : correct maths *74cbdeffd - John Nash, 2019-11-11 : use new posv v2 functions addidtional logging *35d7413b5 - John Nash, 2019-11-11 : add new proofofstakereward *3d917216c - John Nash, 2019-11-11 : get inflation adjustment *f63d17443 - John Nash, 2019-11-08 : add the developer output split fund output *ca263c9c9 - John Nash, 2019-11-05 : add dev key to chainparams *df6996ab0 - John Nash, 2019-11-05 : add block version checking *14b663479 - John Nash, 2019-11-05 : increase block version
Credits
Thanks to everyone who contributed to coding, testing and feedback for this release, notably:
@cryptognasher @techadept @chris @cryptobuze @harmonyq @mindredder @paxtech @Tiago Peralta 
Stake on!!
-Reddcoin (RDD) Core Development Team
submitted by TechAdept to reddCoin [link] [comments]

Crypto Faucet I use to store my mined bitcoin on, with 4.08% APR paid daily with accounts over 30k satoshi. Referral link included, I share 50% commissions with my referrals paid every Sunday if you're interested.

My referral link for the aforementioned FREEBITCO.IN: https://freebitco.in/?r=30437643&tag=redditF
I have cross referenced this post on my site: passivecryptoguides.com
Why should you sign on with me? I'm not a one off, you can reach me personally through DM or post comments. I've done most of the leg work, alleviating the trial and error process. Just follow the steps in this guide specifically in sections 7️⃣, 8️⃣, and 9️⃣.
I share 50% commissions, get a kick back on everything you earn weekly.
I trust this site, and personally have 270$ worth of bitcoin in one account with almost 500$ total including two other accounts.
Coming from Cointiply? Well, as a heads up, you're not actually holding any BTC. I suggest what you earn you HODL in FREEBITCO.IN.
Just some abbreviation and terminology explanation before we start for those unfamiliar.
BTC=Bitcoin
USD=US Dollar
Satoshi
Click here Bitcoin price history, past and present
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
POST LAYOUT
1️⃣GENERAL INFO
2️⃣POST INTENTIONS
3️⃣MY EARNINGS
4️⃣HOW DO COMMISSION REWARDS WORK?
5️⃣SOME CLAIM STATS
6️⃣MULTIPLY BITCOIN STRATS AND INFO
7️⃣AUTOMATION
8️⃣OPTIMIZATION AND USE
9️⃣STRATS TO INCREASE EARNINGS
1️⃣0️⃣ADVERTISING YOUR LINK
1️⃣1️⃣LINKS
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣GENERAL INFO1️⃣
FREEBITCO.IN can be accessed from any device with internet.
Using a VPN or a TOR is now allowed given that your account achieves certain criteria similar to a captcha free account requirements.
🛑WARNING: FREEBITCO.IN wipes inactive accounts after a certain period! If you lose interest, withdraw your BTC!
📝NOTE: iOS devices (iPad, iPhone) are restrictive. The only way to access is via website, as BitBot isn't available.📝
FREEBITCO.IN is what's called a "faucet", a site that gives a small steady stream of crypto which FREEBITCO.IN does through hourly rolls and interest accrual.
FREEBITCO.IN also hosts other means to win or earn crypto, you can gamble with Multiplier, or bet on world evens and crypto prices.
After your account reaches 30k Satoshi, you begin to collect interest. The site also offers lifetime referral commissions, explained later in this guide.
All you need to start is an email. You can add more verification options for security later on. I would highly suggest it. Use a junk email though.
2FA and MFA are strongly suggested. A password should be 15 characters long. I suggest Google Authenticator for your 2FA needs.
I know you can definitely access this site from Brave Browser with add blockers enabled. I'm sure it will work with others. Even without an ad blockers, they only advertise their site gambling and games, no 3rd party adds that I've seen. It's not too invasive or spammy either.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
2️⃣POST INTENTIONS2️⃣
This post is both an advertising platform I use, and a guide I've made to help those interested to automate and optimize earnings.
For those of a cautious mindset, I've uploaded all of FREEBITCO.IN's information on interest accrual, security, and proof of mining on Imgur, in case you're worried about visiting the site.
Transparent link here: Interest accrual structure and FREEBITCO.IN security. https://imgur.com/a/wWjQtKT
My referral link: https://freebitco.in/?r=30437643&tag=redditC2
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
3️⃣MY EARNINGS3️⃣
So at this point, with hourly claims and daily interest, I'm bringing in roughly 8978 Satoshi (or .70$ USD with BTC at 7804$ USD) daily at full optimization on one account, and two other self referred accounts without lifting a finger. This is before the fact that a hourly roll (claim) can reward up to a max of 200$ USD worth of BTC (percentages in section 5️⃣).
They also have a weekly lotto (tickets awarded with every roll and referral roll) with the last 1st place winner receiving .32769156 BTC (2587$ USD at current bitcoin price).
This is also not including my current commissions on accounts not owned by me. In this post I will describe some of my strategies I've incorporated, and some insight into how this website works.
To offload or withdraw bitcoin, you're going to need what is called a "wallet". I personally use Coinbase (available on mobile or desktop) as you can sell it through here as well and easily move money to Paypal or a bank.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
4️⃣HOW DO COMMISSION REWARDS WORK?4️⃣
If you are already on FREEBITCO.IN, do you have someone who referred you? Do they share commissions? If not, why not make a new account and join me, where you'll get a return on everything you earn.
As you can see, large affiliate groups don't share anything, hoarding hundreds of thousands worth of BTC earned off their referrals
I share 50% of my commissions. I get 50% of your roll rewards, 25% of your interest, and 0.4% of your wagers. All of this is paid out by FREEBITCO.IN as a commission, so it's not pulled from your rewards or held BTC.
So the more you're active, the more you'll receive from me weekly (being active is doing anything that I get commissions from). IMPORTANT: Your (and all referrals) shares are based on activity, so if you are inactive for the week, you get a lower % for that week. If you're the most active of my referrals you get a higher percentage of what I share. This is to incentivize being active and to stop people from getting a cut without doing anything.
If you have FREEBITCO.IN automated, you don't have to worry about this. However, having a larger bankroll to earn interest, or playing Multiply BTC (I do not suggest playing unless doing so to meet auto roll requirements) will increase can your activity further.
Commission Structure
Here is some proof, I've actually shared about 2/3 of all commissions
Commissions update 12 January 2020
Here is a proof of Payment section per individual
📝NOTE: I've noticed when I was creating the images of commission sharing that the "RECENT" blocks are showing zero. If you look at totals from the first image, you can tell I'm actively sharing with all of my referrals.📝
Join my team FREEBITCO.IN
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
5️⃣SOME CLAIM STATS5️⃣
You can earn AT LEAST .00000552 BTC (.048$) daily when automated (or claiming every hour on the hour) before bonuses (like using reward points to increase rewards 1000%). After some testing, it seems that this amount will always be about .048$ worth of BTC, base claim rewards no bonus active.
After .00030000 BTC, you accrue compounding interest at a rate of 4.08% APR, paid daily. As soon as your daily interest is accredited, it too starts earning interest. The daily interest rate comes out to ~0.011% of your total held BTC.
FREEBITCO.IN gives you a roll once every hour, free
📝NOTE: Roll rewards fluctuate inversely with BTC price. BTC goes down, roll rewards go up, vice versa. The BTC rewards USD value will be extremely close to the values represented below.📝
Current rewards and probability with every hourly roll.
(.002$) -> 98.85%
(.02$) -> 1.00%
(.20$) -> .08%
(2.00$) -> .04%
(20$) -> .02%
(200$) -> .01%
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
6️⃣MULTIPLY BTC STRATS AND INFO6️⃣
🛑!WARNING!, NO STRATEGY IS 100%, THE MULTIPLIER GAME IS GAMBLING, YOU CAN STILL LOSE YOUR WHOLE BALANCE IF YOU PUSH YOUR LUCK.🛑
UPDATE: I decided to do some research after some odd outcomes when extensively testing some of my Multiplier strats. Turns out FREEBITCO.IN does indeed have a house advantage that isn't too transparent. Longer sessions are almost always going to come out negative. If you still plan on playing, do short sessions, once daily max, with lower amounts.
There are a couple methods to play the Multiplier with a reduced risk (but still a risk) here as well. I would suggest small play sessions.
STRAT #1
My preferred settings for AUTOROLL on MULTIPLY that I've had the best success rate with to date. (preferably with .00005000 in ACCT for best results)
BET: Minimum
ODDS: 3
ROLLS: (doesn't matter, 100)
BET ON: alternate
STOP BETTING PROFIT: .00000050, important as the bets will get exponentially higher with every loss. Win in small increments.
STOP BETTING LOSS: Set a loss limit if you want, I have mine set to .00001 and haven't reached it
ON WIN: select increase bet 0%
ON LOSS: select increase bet 65%
RANDOMIZE CLIENT SEED: yes
DO NOT REFRESH: yes
Here is a pic of the settings
Anything else doesn't matter. Make sure the boxes are checked for the above options.
With this strat, I've won positive on one account, about .000077 BTC, and I've only played 5 or 6 times, at less than 2-3 minutes of play time a session.
STRAT #2
Good for accounts with a low balance. I've had a surprising amount of luck with this method, enough so that I thought I'd post it here with an update. This could work well for accounts with less than 1k Satoshi, as a losing streak wouldn't be a huge loss. For this strat, you should have at least 189 Satoshi in your account.
BET: Minimum amount
ODDS/WIN CHANCE: 189 or %0.5
ROLLS: 189 (remains the same no matter if you bet more)
BET ON: High or Low, but not Alternate.
STOP BETTING ON PROFIT: Minimum amount, once again, you want continuous small wins
UPDATE: Conducting more tests for viability
I played these settings 10 times, I came out positive 8/10 times. In the end I was positive 433 Satoshi total with selecting "hi".
On selecting "low" I went positive 5/10 losing 525 Satoshi.
On selecting "hi" and betting 10 Satoshi, I went positive 3/10 times losing 9708 Satoshi.
On selecting "high" and betting 100 Satoshi, I never went positive, 0/10. Losing 189000 Satoshi (~15$ USD).
There does seem to be a pattern of losing more when betting more. Like anything gambling, there's probably a house advantage that's not too transparent.
Win small lose small.
Pic of these settings
STRAT #3
Another strategy I've tried is betting most of my balance once occasionally with a 94.06% chance of winning. This is, eh, alright to risk OCCASIONALLY, but a loss would set you back more than you ever made using this strategy, which happened to me, I lost about 40 USD worth of BTC after making maybe 5 USD.
THIS METHOD IS GREAT FOR MEETING NON-CAPTCHA ACCOUNT REQUIREMENTS!
Playing this in auto roll, out of 20 rolls I'd always lose at least once, putting me into the negative. Even with 10 rolls, I'd more often then not lose at least once.
Pic of these settings
There are other strats out there, such as the "Martingale", which is essentially doubling the bet amount every loss, then resetting your bet to minimum after a win to in theory "win back what you lost". At 47.5% odds of winning, I've had loss streaks that would drain my account.
My summary for Multiply, use sparingly. Don't use it as your primary means of earning. Use once or twice daily, limit play sessions to 5 minutes max.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
7️⃣AUTOMATION7️⃣
📝NOTE: FREEBITCO.IN captcha requirements seem to be tiered, with requirements for Captcha free upscaling when you BTC holding passes a certain threshold.
I'm currently testing, as is another team member (Shout out to u/SrExtreme69) , what exactly these thresholds, if holding at these thresholds increases the length of Captcha free rolls, and at what amount does FREEBITCO.IN no longer require these to be met.📝
📝NOTE: To start automating, remember to verify email and setup 2FA or the Captcha will still appear even if your account meets Captcha free requirements. Check the site occasionally as Captcha free roll requirements can change. After certain held BTC amount you don't need to renew your requirements. I haven't had to achieve new requirements in over a month.📝
📝NOTE: You may need to manually roll for a bit until the the ability to achieve a Captcha free account becomes available. It doesn't show at first.📝
📝NOTE: It's very difficult, if not impossible to automate on iOS devices.
First of all, getting to this point can be a grind, but once achieved you'll have a steady flow of BTC with options to increase earnings through rewards claims using RP. I would suggest going to your PROFILE tab on FREEBITCO.IN and disabling lottery to increase RP production when starting out. Using other apps or resources to supplement income is a good idea as well.
On the FREE BTC page, there is a blue text hyperlink with requirements that need to be met to make your account captcha free, thus allowing you to enable autoroll on extensions or apps. It has multiple ways to achieve this and they can change, so if your autoroll has stopped, check to see if these requirements have changed.
Here are the requirements. (Amounts vary)
It seems only two of these requirements need to be met.
The less risky and easiest method is to buy lottery tickets and bet with jackpots on. Even better is depositing bitcoin if you have that amount.
The POSSIBLY least expensive method is to bet both regularly and with Jackpots enabled on MULTIPLY (for higher amounts required, IMO Multiplier strat #3 works best)
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
8️⃣OPTIMIZATION AND USE OF FREEBITCO.IN8️⃣
For computers
I would suggest using Firefox, as you can add functions and tools to your bar up top. One of the being a "auto roll" for FREEBITCO.IN, still requires a "captcha free" account. Turn it on and let go, check it occasionally to make sure its still going.
Autoroll firefox add-on link
My link again for ease of access
Not my preferred method, but good for a second account, as using a computer means devoting more attention to FREEBITCO.IN in an inconvenient manner if you are just starting out. After Captcha has been removed, this becomes more hands free, but not as profitable as using bitbot, as you can't autoclaim RP rewards.
I haven't tried many methods besides using Firefox addons, as I'm wary of sources or intent when it comes to 3rd party scripts or programs. If I find any trustworthy scripts or programs, I will update here.
For Mobile
🛑BITBOT WARNING, IF YOU USE BITBOT TO ACCESS FREEBITCO.IN BEFORE USING MY REFERRAL, YOU WILL BE REFERRED THROUGH BITBOT, AND THEY DON'T SHARE COMMISSIONS AS FAR AS I CAN TELL🛑 My Link again
📝NOTE: iOS devices (iPhone, iPad) do not have access to BitBot, nor do they allow extensions/add-ons on their browsers. I have not personally found a way around this. You may still access the site and manually roll.📝
I use BitBot. This is the best place to start from IMO. You can set it to notify you of rolls and gives direct access to the site from the app (you can also access the site from any device with internet). Once your account is "captcha free" you can set it to auto roll AND automatically claim rewards every 24 hours (RP increase, BTC increase, Lottery ticket Increase).
📝NOTE: Bitbot allows auto roll from the app for accounts over 500 RP. This isn't permanent, as it uses your RP. You'll need to log onto the website through a browser to achieve captch free account requirements, which Bitbot does recognize, which allow completely free rolls.📝
📝NOTE: Accessing FREEBITCO.IN through BitBot doesn't allow access to the Hi-Lo or betting games.📝
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
9️⃣STRATS TO INCREASE EARNINGS9️⃣
Bitbot optimization
I started manual claims by setting roll notifications to "ON" for a while until I supplemented my BTC in FREEBITCO.IN with what I was collecting from my miner and CryptoTab. Once I was able to AUTOMATE and I had enough RP to claim the RP BONUS, I set it to do that automatically every 24 hours as this nets more RP than you spend (EG, 100 RP roll bonus costs 1200 RP, but can net 2400 RP if claimed every hour). Eventually you accrue enough RP to claim the %1000 BTC bonus, probably at a rate of once or twice a week.
My current BitBot settings now that its auto claiming, I have the 24 hour auto bonus claiming 100 RP roll bonus and 100% claim bonus, spending a total of 1520 RP, but I'm making 2400 RP with the RP bonus, leaving me 780 RP in the positive each day. Every now and then I'll stop the auto bonus claim so I can buy the 1000% claim bonus (3200 RP). So on a normal day I'll make about 1344 Satoshi. Bitbot auto bonus settings
Once your accrue more referrals, or save enough RP, it's possible to claim the 1000% BTC roll bonus multiple days in a row. This is just about as optimal as you can get for auto rolling.
Self Referrals
If you have two devices (phone and computer preferably) you can make two accounts as long as one uses a different wifi or internet connection, as the roll rewards tracks IP addresses for roll counts. So if you have 2 devices on the same network, it sudo links accounts, so if you roll on one, it restarts the timer on the other. This allows you to collect referral rewards from yourself. Effectively adding 25% of interest and 50% roll rewards.
I currently have a phone autorolling on BitBot with a computer autorolling on Firefox with a tool to roll automatically as long as the page remains open. My computer account is referred from my mobile account, and is currently bringing in an extra .000015+ BTC weekly (currently, total will be this Sunday and I will update).
I've also made another account on my partners phone, linked it with bitbot and got it auto-rolling. Once bitbot is going, its non-invasive and you can silence notifications, it also uses minimal data.
Supplementing with CryptoTab
I'll use CryptoTab on my computer 24/7 to earn BTC from that while I have FREEBITCO.IN running. I also have it running on my phone at night when I sleep and on an iPad I have that I don't use much, its server mining, so no worries about battery on mobile devices. On computers it does actually use your processing power. You can directly deposit into you FREEBITCO.IN accounts.
CryptoTab Link
I've used it for two weeks and have earned a total of .000454 BTC (3.60$ USD). Not huge, but enough to start collecting interest on FREEBITCO.IN and to get the capthca free account requirements.
Supplementing with Cointiply
🛑WARNING: Cointiply's main currency is the constant, weighted against the dollar (10,000 coin/1USD). This means your actually BTC holdings will fluctuate with BTC's price.
For this reason, it's my strong opinion that DON'T HODL in Cointiply as you're not holding actual BTC.🛑
Cointiply is a great site to earn decent amounts of COIN which translate to SAT's. Earn coin, withdraw to FREEBITCO.IN (as you actually hold BTC in cointiply).
I also use an ASIC miner (Antminer s9i, DIY liquid cooled and overclocked with BixBit firmware), and whatever I earn I'll put that into FREEBITCO.IN to collect interest. If you want, I may be willing to do a rental.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣0️⃣ADVERTISING YOUR LINK1️⃣0️⃣
📝NOTE: Since this faucet has been around a while, many people privy to sites such as this are already signed up. So getting referrals can be a slog. My tips for your ads is be genuine and don't hard sell or post "too good to be true" sensational ads.📝
COINTIPLY
This is another faucet. Its structure is a bit different from FREEBITCO.IN, as you complete offers to earn coin. Within this site (also an app) users can earn coins by doing PTC ads (and other offers), this is a good method to get exposure as you can advertise as well. Using this method my traffic for last week as about 800 people.
13000 coins buys about 1000 "clicks" on your ads. They also have options to advertise to people based on location (these options will increase or decrease cost). After your first ad, you usually get a 10% off coupon good for 7 days as well.
You can earn this amount within a day doing surveys on Theorem. I've done surveys before, and this has to be one of the best surveys sights I've ever done. Very rarely do I get kicked out mid survey, and if I do, I still get partial pay.
I will also use "Hideout" on my computer and leave it running. It has to be the open tab on your browser, with the browser open, not minimized. Let it go and check it occasionally as it has a timeout at roughly 2-3 hrs idle. As of now this is the best passive method of earning on Cointiply.
PI NETWORK
Pi Network, an ICO (Initial coin offering) based on trust and social media is another good medium for advertising. I will usually see 15-20 people click on my link with 2-4 ads posted per day.
Just go to "chat", select "random" and post an ad in the chat channel. No charge.
My tip, keep your ads short to medium in length, don't spam.
XYO NETWORK/COIN APP
This is another crypto earned through "geo-mining". On the "coin" app you can do a "geodrop" where you can leave a note. Just click on the box with a parachute icon, select "any" on the "Tile" selection. Leave your ad in the "note" section.
It costs 10 "COIN" at the very least to do a "geodrop". This method may not be worth it if you aren't already involved in the program. To earn a substantial amount of coin, you'll need a subscription or a "sentinel". Sentinels can actually be purchased for under 20$ nowadays (depending on site) and is the best option to earn. Without these you'll only make approx .05-.18 coin every 30 seconds if you're actively moving.
My tips if you plan on advertising on this platform, once again keep it short, and only advertise around 7-9am and 4-6pm, as this will be peak mining hours with people driving to and from work.
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
1️⃣1️⃣LINKS1️⃣1️⃣
My FREEBITCO.IN Referral Link
What is a Satoshi?
Bitcoins price through Coingecko
CryptoTab Link
Autoroll on Firefox
Coinbase Link
PI NETWORK
COINTIPLY
XYO NETWORK/COIN APP
⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹⏹
submitted by thatoneguyYMK to SpareCash [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

How to sign and Verify messages with your Bitcoin Adress from your Softwarewallet Blockchain - How To Verify A Bitcoin Transaction And Get ... Bitcoin Rush-39 w/ E-Coin, ScotCoin, BlockVerify Blockchain/Bitcoin for beginners 7: Blockchain header: Merkle roots and SPV transaction verification 10. Bitcoin. BlockChain - YouTube

Download Bitcoin Bitcoin verifying blocks Paket Tidung – Wisata Pulau Tidung Node synchronization is painfully slow Google Groups 8.will be slow to death if you're not using SSD when you launch Bitcoin-Qt for the first time. Bitcoin qt faster sync. My wallet balance is not correct. Bitcoin is a worldwide cryptocurrency and digital payment system:3 called the first decentralized digital currency, since the system works without a central repository or single administrator.:1 It was invented by an unknown programmer, or a group of programmers, under the name Satoshi Nakamoto and released as open-source software in 2009. The system is peer-to-peer, and transactions take ... Buying crypto like Bitcoin and Ether is as easy as verifying your identity, adding a payment and clicking "Buy". Sign up for our Wallet today. bestearnidea.com This online earning site will help you how to earn money. Earn money from your mobile websites.Did you try to make money online before but did not get success. The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page.

[index] [22530] [4105] [23404] [2707] [6472] [20564] [9273] [26522] [2944] [3206]

How to sign and Verify messages with your Bitcoin Adress from your Softwarewallet

This video is unavailable. Watch Queue Queue. Watch Queue Queue How are transactions stored (and recorded) in the Blockchain blocks? Using a concept called a Merkle tree - in this video I break it down in depth with a simple example and show how a SPV node ... A bitcoin halving is an event where the reward for mining new blocks is halved, meaning miners receive 50% fewer bitcoins for verifying transactions. Bitcoin halvings are scheduled to occur once ... For more tips like these visit http://bodymindsuccess.com/bitcoin or subscribe to our channel Bitcoin is a decentralized, peer-to-peer monetary system that exists outside of the traditional, centralized, fiat-currency based financial system. Is Bitcoin money? Good question!

#